 |
| quantitas; | |
|---|---|
PL1030-16
Specification:
| MODEL | PL1030-16 | |
Norminal impedimento | 8 | Ohm |
| Potentia | 250 | W |
| Sensitivity (1w / 1m) | 93 | db |
| Frequentiam range | 40-4000 | HZ |
| Vox diametro | III \"(75mm) | |
| Vox material | Aes | |
| Vox caelo flumina profundum | 18.5 | mm |
| Magna gap profundum | 8 | |
| Canistro | Cast Aluminium | |
| Effect.Diaphragm Diameter D | 212 | mm |
| Thiele - Parva Parameters4 | ||
| Resonance frequency Fs | 50.4 | HZ |
| DC Resistance Re | 11.2 | ohm |
| Mechanica facto QMs | 8.45 | |
| Electrical Factor QES | 0.4 | |
| Summa factor Qts | 0.38 | |
| BL factor BL | 19.6 | T.M |
| Efficens massa MMS | 43.2 | c |
| Equivalent Gas aere onus Vas | 40.3 | lits |
| Piston Area Effettive SD | 0.035 | M2 |
| Max. linearibus peregrinandum (mathematical) Xmax | ± 5.25 | mm |
| Voice -c Coil inductance @ 1KHz Le | 1.6 | mh |
| Adscendens notitia | ||
| DIGNUS | 262 | mm |
| Sestertius Circulum Diameter | 246 | mm |
| Baffle cutout diameter | 232 | mm |
| DIGNUS | VIII, ∅6.5 | mm |
| Altiore profundum: | 121 | mm |
| Pondus retia | 5 | kg |
Specification:
| MODEL | PL1030-16 | |
Norminal impedimento | 8 | Ohm |
| Potentia | 250 | W |
| Sensitivity (1w / 1m) | 93 | db |
| Frequentiam range | 40-4000 | HZ |
| Vox diametro | III \"(75mm) | |
| Vox material | Aes | |
| Vox caelo flumina profundum | 18.5 | mm |
| Magna gap profundum | 8 | |
| Canistro | Cast Aluminium | |
| Effect.Diaphragm Diameter D | 212 | mm |
| Thiele - Parva Parameters4 | ||
| Resonance frequency Fs | 50.4 | HZ |
| DC Resistance Re | 11.2 | ohm |
| Mechanica facto QMs | 8.45 | |
| Electrical Factor QES | 0.4 | |
| Summa factor Qts | 0.38 | |
| BL factor BL | 19.6 | T.M |
| Efficens massa MMS | 43.2 | c |
| Equivalent Gas aere onus Vas | 40.3 | lits |
| Piston Area Effettive SD | 0.035 | M2 |
| Max. linearibus peregrinandum (mathematical) Xmax | ± 5.25 | mm |
| Voice -c Coil inductance @ 1KHz Le | 1.6 | mh |
| Adscendens notitia | ||
| DIGNUS | 262 | mm |
| Sestertius Circulum Diameter | 246 | mm |
| Baffle cutout diameter | 232 | mm |
| DIGNUS | VIII, ∅6.5 | mm |
| Altiore profundum: | 121 | mm |
| Pondus retia | 5 | kg |
