 |
| quantitas; | |
|---|---|
PL1025
Specification:
| MODEL | PL1025 | |
Norminal impedimento | 8 | Ohm |
| Potentia | 200 | W |
| Sensitivity (1w / 1m) | 94 | db |
| Frequentiam range | 40-5000 | HZ |
| Vox diametro | 2.5 \"(65mm) | |
| Vox material | Aes | |
| Vox caelo flumina profundum | 12.3 | mm |
| Magna gap profundum | 8 | |
| Canistro | Cast Aluminium | |
| Effect.Diaphragm Diameter D | 210 | mm |
| Thiele - Parva Parameters4 | ||
| Resonance frequency Fs | 43.7 | HZ |
| DC Resistance Re | 5.6 | ohm |
| Mechanica facto QMs | 2.33 | |
| Electrical Factor QES | 0.29 | |
| Summa factor Qts | 0.26 | |
| BL factor BL | 14.4 | T.M |
| Efficens massa MMS | 39.4 | c |
| Equivalent Gas aere onus Vas | 56.6 | lits |
| Piston Area Effettive SD | 0.035 | M2 |
| Max. linearibus peregrinandum (mathematical) Smaax | ± 2.15 | mm |
| Voice -c Coil inductance @ 1KHz Le | 0.7 | mh |
| Adscendens notitia | ||
| DIGNUS | 262 | mm |
| Sestertius Circulum Diameter | 246 | mm |
| Baffle cutout diameter | 232 | mm |
| DIGNUS | VIII, ∅6.5 | mm |
| Altiore profundum: | 116 | mm |
| Pondus retia | 4.1 | kg |
Specification:
| MODEL | PL1025 | |
Norminal impedimento | 8 | Ohm |
| Potentia | 200 | W |
| Sensitivity (1w / 1m) | 94 | db |
| Frequentiam range | 40-5000 | HZ |
| Vox diametro | 2.5 \"(65mm) | |
| Vox material | Aes | |
| Vox caelo flumina profundum | 12.3 | mm |
| Magna gap profundum | 8 | |
| Canistro | Cast Aluminium | |
| Effect.Diaphragm Diameter D | 210 | mm |
| Thiele - Parva Parameters4 | ||
| Resonance frequency Fs | 43.7 | HZ |
| DC Resistance Re | 5.6 | ohm |
| Mechanica facto QMs | 2.33 | |
| Electrical Factor QES | 0.29 | |
| Summa factor Qts | 0.26 | |
| BL factor BL | 14.4 | T.M |
| Efficens massa MMS | 39.4 | c |
| Equivalent Gas aere onus Vas | 56.6 | lits |
| Piston Area Effettive SD | 0.035 | M2 |
| Max. linearibus peregrinandum (mathematical) Smaax | ± 2.15 | mm |
| Voice -c Coil inductance @ 1KHz Le | 0.7 | mh |
| Adscendens notitia | ||
| DIGNUS | 262 | mm |
| Sestertius Circulum Diameter | 246 | mm |
| Baffle cutout diameter | 232 | mm |
| DIGNUS | VIII, ∅6.5 | mm |
| Altiore profundum: | 116 | mm |
| Pondus retia | 4.1 | kg |
